Find your alloy at a glance
These four graphs show at a glance the mechanical characteristics of all the alloys with all the production technologies we can offer you.
- Strength Rm MPa / density
- Strength Rp 0.2 MPa / density
- Elongation at break A % in mm / density
- Hardness HB / density
(F) die-casting alloy. (M) hot forging. (G) Gravity die casting
You can enlarge the graphs by clicking on them.
| Alloy |
Detail | Techno | Density | Resistance Rm MPa | Resistance Rp 0.2 MPa | Elongation at break % mm | Hardness HB |
| ENAC-43400 (F) | ENAC-43400 AlSi10Mg(Fe) EN 1706 AS10G | F | 2.66 | 240 | 140 | 1 | 70 |
| ENAC-43500 (F) | ENAC-43500 AlSi10MnMg EN 1706 AS10G | F | 2.66 | 250 | 120 | 5 | 65 |
| 61D (F) | 61D-AlSi10Mg haute résistance | F | 2.66 | 300 | 180 | 5 | 85 |
| ENAC-44300 (F) | ENAC-44300 AlSi12(Fe) EN 1706 AS12 | F | 2.66 | 240 | 130 | 10 | 60 |
| ENAC-46000 (F) | ENAC-46000 AlSi9Cu3(Fe) EN 1706 AS9U3 | F | 2.66 | 240 | 140 | 0.5 | 80 |
| ENAC-47100 (F) | ENAC-47100 AlSi12Cu1(Fe) EN 1706 AS12U | F | 2.66 | 240 | 140 | 1 | 70 |
| ENAC-51500 (F) | ENAC-51500 EN 1706 anti-corrosion AlMg5Si2Mn | F | 2.66 | 250 | 140 | 5 | 70 |
| ZL04100-zamak 5 (F) | ZL0410–ZnAl4Cu1 EN 1774 Zamak 5 | F | 6.7 | 331 | 295 | 3.6 | 114 |
| CW304G (M) | CW304G Bronze CuAl9Ni3Fe2 EN 12165 | M | 7.6 | 500 | 180 | 30 | 115 |
| CW307G (M) | CW307G Bronze CuAl10Ni5Fe4 EN 12165 | M | 7.6 | 650 | 350 | 12 | 170 |
| CW510L (M) | CW510L Laiton CuZn42 (Sans Plomb) EN 12167 | M | 8.4 | 350 | 140 | 15 | 70 |
| CW612N (M) | CW612N Laiton CuZn39Pb2 EN 12165 | M | 8.4 | 350 | 140 | 15 | 70 |
| CW710R (M) | CW710R Laiton CuZn35Ni3Mn2AlPb EN 12165 | M | 8.3 | 440 | 180 | 10 | 100 |
| CW713R (M) | CW713R Laiton CuZn37Mn3Al2PbSi EN 12165 | M | 8.2 | 550 | 200 | 8 | 130 |
| CW716R (M) | CW716R Laiton CuZn37Al1/CuZn38Mn1Al EN12163 | M | 8.2 | 480 | 210 | 18 | 120 |
| CuZn19Al6 (M) | Laiton CuZn19Al6 NF L14-707 | M | 7.6 | 780 | 540 | 7 | 225 |
| CB754S (F) | CB754S Laiton CuZn39Pb1Al-B EN 1982 60/40 | F | 8.4 | 350 | 250 | 4 | 110 |
| CB761S (F) | CB761S laiton CuZn16Si4-B EN 1982 | F | 8.65 | 530 | 370 | 5 | 150 |
| ENAC-42200 (G) | ENAC-42200 AlSi7Mg0.6 EN 1706 AS7G0.6 | G | 2.67 | 320 | 240 | 3 | 100 |
| ENAW-7075 (M) | ENAW-7075 AlZn5.5MgCu EN 573-3 AZ5GU | M | 2.8 | 530 | 450 | 8 | 150 |
| ENAW-2017 (M) | ENAW-2017A AlCu4MgSi EN 573-3 AU4G | M | 2.79 | 390 | 235 | 12 | 105 |
| ENAW-6082 (M) | ENAW-6082 AlSi1MgMn EN 573-3 ASG | M | 2.71 | 310 | 280 | 12 | 95 |